When observed from a neutral point, the whole process seems smooth and easy, and the atmosphere implicates good deeds and helping hand by professionals. However, towing is almost the art itself. Like any other task that requires handling a tough situation with risk to people and property involved, towing imposes high challenges in many aspects. When towing for the first time, adrenalin rush, fear and a certain level of consequential clumsiness are almost inevitable. It takes comprehensive skills, full – time concentration and some knowledge to predict the reactions and interactions between the towing vehicle and attached trailer.

It especially refers to risky situations, such as driving over bumps, taking turns or changing speed. Towing for the first time will probably be an anxious experience, but over the time, with some lessons learned and experience gained, towing becomes intuitive as you learn to adjust your driving skills accordingly. Experts from Phoenix towing service, towing mesa az, revealed few tips and tricks of the experienced on how to overcome usual obstacles and reach the level of intuitive, smooth towing.

Adequate tow vehicle and load leveling technique

The greatest challenge in towing is to synchronize two vehicles, consider all the physical forces interacting between them and to adjust the whole system and the mere driving accordingly. It requires knowing few numbers and traits of both vehicles to provide adequate load leveling. The main trait you have to work around is downforce the trailer applies to the tow vehicle.

You have to know weight limitations and loading capacity of the tow vehicle, as well as to have all the required equipment. Downforce should not exceed 15% of trailers overall weight and the back of tow vehicle should not sag significantly. Otherwise, you risk uneven tire wear, higher fuel consumption, troubling other drivers with uneven headlights or weak control of tow vehicle. To avoid all of this, make sure your tow vehicle is equipped with airbags or self – leveling shock absorbers.

Proper towing setup to eliminate issues on highway

It won’t last longer than 15 minutes, but it might spare you from a lot of risky or bothering problems during the drive. The goal is to achieve a steady balance between towing vehicle and trailer with the trailer being set parallel to the ground and in line with chassis of towing vehicle. This configuration should withstand turbulences on the road and prevent gravity center of trailer slipping too forward or backward.

To achieve this, first check all the necessary features, such as inflation of all tires, hoses, belts, spring hangers and levels of fluid in both vehicles. After dropping trailer onto hitch ball, make sure to lock it properly and tight with additional safety chains. Adjust W-D systems to balance the load and position the center of the load until you achieve steady balance. When the system is set, adjust the mirrors to provide the view to entire trailer length.

Driving style and tips for the road

Having significant weight of a trailer loaded onto your vehicles makes a huge difference in performances of the towing vehicle. Trailer particularly affects accelerations and stopping time span which directly affects the safety of other drivers on the road and yourself. Thus, slow down is essential advice. Keeping your speed adjusted to the so called “four or six seconds rule” will ensure your safety and decrease fuel consumption at the same time. Four or six seconds rule refer to the time – distance between you and the vehicle ahead you should keep on the clear and dry road or in the bad driving conditions. Also, stay focused, responsible and highly attentive. Consider all the surrounding on the road, leave a cell phone and stereo aside and provide your undivided attention to conditions on the road.